'The Unholy Trinity' Behemoth solid sterling silver signet ring - production upon demand
On the octagonal signet ring we have placed "The Unholy Trinity" Behemoth sigil, which is an impression of Red King alchemical/occult symbol, while on the sides you will find a subtly engraved Unicursal Hexagram, associated with Crowley's Thelema philosophy.
Mother signet - this is how the artists use to call the first artifact, created and hand-engraved in a goldsmith workshop. During this process only old techniques were used. No new technologies nor mass production has been applied here. These Mother Signets have been handed over to Nergal after the production was finished.
Castings, made from Mother Signets have been made in solid sterling silver (925). After the signets have been taken out from the furnace, they have been further processed by hands only in the same goldsmith workshop. This makes each signet ring to be slightly different from another one - which means each item is completely exceptional and unique.
The ring is made in two variants - a bit bigger for bigger sizes (22 and bigger) and slightly smaller for smaller sizes (21 and smaller) - as you can see on the pictures. Please make sure to check out the size chart, the default sizing is continental European, but in the size chart you will find mapping to US and UK measurements.
Also, for your convenience we are attaching the printable ring size chart. The measure which we use is marked as EUR. To find its equivalent in US or some other measurement pattern, just print out the sheet and check the size with the ruler. The PDF can be downloaded here:
The shield of the bigger signet size is approx 15#12 mm (0.59#0.47 in), the smaller - 11#9 mm (0.43#0.35 in)
NOTE: Each ring is made to particular order, and the estimation production time is 3 weeks from the day the order is paid. Please note that there is a several days tolerance - we can send it a bit earlier or later than that.
PLEASE MIND THAT SINCE THE RINGS ARE MADE ON DEMAND, CANCELLING AND REFUNDING OF AN ORDER IS NOT POSSIBLE. PLEASE MAKE THE ORDER CAREFULLY. However, if it turns out to be a size mismatch, we can re-size your ring without problems (the conditions will be agreed upon separately).
BEFORE YOU MAKE AN ORDER, MEASURE YOUR FINGER AT SOME JEWELLERY SHOP AND CHOOSE YOUR SIZE USING OUR SIZING CONVERSION CHART TO MAKE SURE YOU'VE CHOSEN THE RIGHT ONE!
IMPORTANT: This item is made of metal. Although the highest quality materials have been used, the general rule for any jewelry from any manufacturer is that the metal can react in a specific way to your sweat or skin. If you know that you are allergic to metals or that they leave some color on your skin after contact with your sweat - make a purchase consciously.
Take care of your jewelry. You will find a lot of information on this topic on the Internet, and only taking the proper care of jewelry will guarantee that it will look neat throughout the time.
Opinions about 'The Unholy Trinity' Behemoth solid sterling silver signet ring - production upon demand
|Size||Inside diameter:||Inside circumference:||USA/Canada sizing||UK/Ireland/Australia sizing|
|11,75||16,51 mm / 0.65 in||51,9 mm / 2.04 in||6||L 1/2|
|11,25||16,3 mm / 0.64 in||51,1 mm / 2.01 in||5 3/4||L|
|12 1/2||16,7 mm / 0.65 in||52,5 mm / 2.06 in||6 1/4||M|
|14 1/3||17,3 mm / 0.68 in||54,4 mm / 2.14 in||7||N 1/2|
|16,25||17,93 mm / 0.706 in||56,3 mm / 2.22 in||7 3/4||P|
|17 1/2||18,3 mm / 0.72 in||57,5 mm / 2.26 in||8 1/3||Q|
|18||18.5 mm / 0.73 in||58 mm / 2.28 in||8 1/2||Q 1/2|
|18,8||18,7 mm / 0.73 in||58,8 mm / 2.31 in||8 3/4||R|
|19,5||18,95 mm / 0.746 in||59,5 mm / 2.34 in||9||R 1/2|
|21||19,4 mm / 0.76 in||61 mm / 2.4 in||9 1/2||S 3/4|
|22||19,76 mm / 0.778 in||62 mm / 2.44 in||9 7/8||T 1/2|
|22 1/2||19,9 mm / 0.78 in||62,5 mm / 2.46 in||10 1/4||U|
|23||20,1 mm / 0.79 in||63,1 mm / 2.48 in||10 3/8||U 1/2|
|23 3/4||20,3 mm / 0.79 in||63,8 mm / 2.51 in||10 5/8||V|
|24 1/4||20,5 mm / 0.80 in||64,4 mm / 2.53 in||10 7/8||V 1/2|
|24 3/4||20,6 mm / 0.81 in||64,7 mm/ 2.54 in||11||V 3/4|
|26||21 mm / 0.82 in||66 mm /2.59 in||11 1/2||W 3/4|
|26 1/4||21,1 mm / 0.83 in||66,2 mm / 2.6 in||11 5/8||X|
|27||21,3 mm / 0.83 in||67 mm / 2.63 in||11 7/8||X 1/2|
|27 1/8||21,4 mm / 0.84 in||67,2 mm / 2.64 in||12||X 3/4|
|28 3/4||21,9 mm / 0.86 in||68,7 mm / 2.7 in||12 5/8||Z|
|29||22 mm / 0.86 in||69 mm / 2.71 in||12 6/8||Z 1/4|
|29 1/3||22,1 mm / 0.87 in||69,4 mm / 2.73 in||12 7/8||Z 1/2|
|29,5||22,5 mm / 0.88 in||70,5 mm / 2.77 in||13 3/8||Z + 1/2|
|Z++||22,7 mm / 0.89 in||71,3 mm / 2.80 in||13 1/2||Z++|
|32,5||22,9 mm / 0.90 in||72 mm / 2.83 in||13 7/8||Z ++ 1/2|
|34,75||23,1 mm / 0.90 in||72,5 mm / 2.85 in||14 1/4||Z+++|
|Z++++||23,5 mm / 0.92 in||73,9 mm / 2.9 in||14 5/8||Z++++|
|Z++++.9||23,83 mm / 0.93 in||Z++++.9|